Author Topic: Atlantic Towers Arch  (Read 241 times)

svsurprise

  • Full Member
  • ***
  • Posts: 33
    • View Profile
Atlantic Towers Arch
« on: September 21, 2018, 01:18:24 PM »
I've read the previous posts about experiences with Atlantic Towers arches and have noted that quite a number of 44 WO's have installed one.  Since a few years have gone by since the last post I thought I might ask for any current advice on purchasing and installing one.  Three preliminary questions I have are: Schedule 40 or 80? Mount on deck or side?  Offset legs?

It seems to me these boats just scream for an arch and I'd really like to upgrade the davits I'm currently using.  With a swim platform it's difficult to get the dinghy out and away while hoisting.  I hope to stiffen up the solar panel mounting configuration too.

Any advice is welcome.

Thanks in advance,
Don
SV Surprise

svsurprise

  • Full Member
  • ***
  • Posts: 33
    • View Profile
Re: Atlantic Towers Arch
« Reply #1 on: September 21, 2018, 01:19:34 PM »
Whoops, sorry for posting that in the wrong location.... :-\

Mercy McFly

  • Newbie
  • *
  • Posts: 3
    • View Profile
  • Boat Type: CSY 44 WO #150
  • Boat Name: Ocean Cowboy
Re: Atlantic Towers Arch
« Reply #2 on: September 28, 2018, 06:55:42 PM »
Don, Not sure if you looked at Ocean Cowboy's davit system this summer. I plan on having it made taller, to get the boat higher off the swim platform, and also a frame made on top for lots of solar. Next summers project. If you liked it I'm sure the welder could make a copy and you could install yourself

Jules Shockley

  • Sr. Member
  • ****
  • Posts: 154
    • View Profile
  • Boat Type: CSY 44 W/O
  • Boat Name: Dragon Lady
Re: Atlantic Towers Arch
« Reply #3 on: September 30, 2018, 05:39:20 PM »
Don,
Don't know your location or time frame. If you are anywhere near Ft. Pierce, Fl., Riverside Marine has an excellent welder, named Danny. He custom built a swim platform and a radar arch from heavy aluminum. An excellent job with all the bells and whistles. We couldn't be happier. Aluminum is lighter and cheaper and will outlast us. Swim platform was $800 and the arch an  astonishing $3000. We will never outgrow either. The regret is that we didn't do it sooner.
Something to think about.
Jules-Dragon Lady

The Allegro

  • Newbie
  • *
  • Posts: 3
    • View Profile
  • Boat Type: CSY 37
  • Boat Name: Allegro
Re: Atlantic Towers Arch
« Reply #4 on: November 02, 2018, 10:40:24 AM »
Jules, do you have a picture of that work they did. I'm looking into getting one put on my CSY 37. Thanks-Scott
Scott Bruce
Professor and Sailor

Jules Shockley

  • Sr. Member
  • ****
  • Posts: 154
    • View Profile
  • Boat Type: CSY 44 W/O
  • Boat Name: Dragon Lady
Re: Radar Arch
« Reply #5 on: November 08, 2018, 07:36:59 AM »
A picture of the tower custom made at Riverside Marina in Ft. Pierce, Fla. for $3000.
All the bells and whistles.

svsurprise

  • Full Member
  • ***
  • Posts: 33
    • View Profile
Re: Atlantic Towers Arch
« Reply #6 on: November 09, 2018, 07:36:30 AM »
Beautiful arch!  I'm located in Beaufort NC but leaving Sunday for the Bahamas and plan on making a last provisioning stop in Ft Pierce. If time permits I'll contact you while there.
Don

Stargazer

  • Newbie
  • *
  • Posts: 4
    • View Profile
Re: Atlantic Towers Arch
« Reply #7 on: November 19, 2018, 03:12:54 PM »
Looks great, that project is next on our list.  We are out on the West Coast, or else I would give your welder a call.  I like how you integrated it with the Stern Pushpit.  Any more detailed photos would be appreciated.